外文翻译

机械工程英语——Lesson 23 Pressure Transducers

时间:2013-04-12 15:32:15   作者:未知   来源:网络文摘   阅读:769   评论:0

Introduction to Pressure Transducers(变换器)

What is a pressure transducer? A pressure transducer is a transducer that converts pressure into an analog electrical signal. Although there are various types of pressure transducers, one of the most common is the strain-gage base transducer. The conversion of pressure into an electrical signal is achieved by the physical deformation of strain gages which are bonded into the diaphragm of the pressure transducer and wired into a wheatstone bridge configuration. Pressure applied to the pressure transducer produces a deflection of the diaphragm which introduces strain to the gages. The strain will produce an electrical resistance change proportional to the pressure.

The Electrical Output of Pressure Transducers

Pressure transducers are generally available with three types of electrical output; millivolt, volt and 4-20mA. Below is a summary of the outputs and when they are best used.

Millivolt Output Pressure Transducers

Transducers with millivolt output are normally the most economical pressure transducers. The output of the millivolt transducer is nominally around 30mV. The actual output is directly proportional to the pressure transducer input power or excitation. If the excitation fluctuates, the output will change also. Because of this dependence on the excitation level, regulated power supplies are suggested for use with millivolt transducers. Because the output signal is so low, the transducer should not be located in an electrically noisy environment. The distances between the transducer and the readout instrument should also be kept relatively short.

Voltage Output Pressure Transducers

Voltage output transducers include integral signal conditioning which provide a much higher output than a millivolt transducer. The output is normally 0-5Vdc or 0-10Vdc. Although model is specific, the output of the transducer is not normally a direct function of excitation. This means unregulated power supplies are often sufficient as long as they fall within a specified power range. Because they have a higher level output these transducers are not as susceptible to electrical noise as millivolt transducers and can therefore be used in much more industrial environments.

4-20 mA Output Pressure Transducers

These types of transducers are also known as pressure transmitters. Since a 4-20mA signal is least affected by electrical noise and resistance in the signal wires, these transducers are best used when the signal must be transmitted long distances. It is not uncommon to use these transducers in applications where the lead wire must be 1000 feet or more

Styles of Pressure Transducers

PC Board Mountable Pressure Transducers

PC board mountable pressure transducers are generally compact economical pressure transducers designed to mount on an electrical PC board and be integrated into other products.

General Purpose Transducers

General purpose pressure transducers are the most common since they are designed to fit the broadest set of applications.

Heavy Duty/Industrial Pressure Transducers

Heavy Duty/Industrial Pressure transducers feature a much more rugged enclosure than other transducers. They are designed to accommodate heavy industrial environments. They also often feature a scalable 4-20mA output that provides much greater immunity to electrical noise which is not uncommon in industrial environments.

High Stability/High Accuracy Pressure Transducers

Most pressure transducers feature an accuracy of 0.25% of full scale or higher. High stability and high accuracy pressure transducers can offer errors as low as 0.05% of full scale, depending on model. Although more expensive than general purpose transducers, they may be the only option if high precision is required.

Flush Diaphragm Pressure Transducers

With flush diaphragm pressure transducers, the diaphragm is flush to the process. This eliminates a cavity above the diaphragm that could collect fluid matter from the process. In certain applications, this may be very undesirable. Those applications include monitoring the pressure of foods or liquids that have very high viscosity.

Special Purpose Transducers

OMEGA offers a variety of pressure transducers with special features. These include pressure transducers designed for pressure measurement in very high or low temperatures, submersible pressure transducers, barometric pressure transducers and pressure transducers with digital communications output or wireless outputs.

Vocabulary

1.transducer n. 变换器;变频器

2.analog n. 类似物

3.strain-gage n.

4.conversion n. 转换;变化

5.deformation n. 变形

6.diaphragm n. 振动模

7.wheat stone

8.millivolt n. 毫伏

9.wireless a.无线的

10.flush diaphragm 平面图


标签:机械工程英语  Pressure  Transducers  
相关评论
免责申明:我要玩起网旨在提供一个相互学习交流的平台,是一个完全免费的网站,部分原创作品,欢迎转载,部分内容来自互联网,如果侵犯了您的权利请尽快通知我们!邮箱:834308595@qq.com Copyright 2018-2021我要玩起网  湘ICP备17006802号-2